Configuring The Netcomm V100 ATA

Please note that you will need to register for AdamTalk before configuring your ATA.

System Requirements:

Processor: Pentium III 700 MHz (or equivalent)
Memory: 128 MB RAM
Hard Disk Space: 30 MB
Operating System: Windows 2000, Windows XP, Mac OS X 10.4
Internet Connection: 256/64 (Minimum) 512/128 or above (Recommended)

Step 1 - Installing the V100 ATA Utility
  • Insert the CD-ROM provided in your Netcomm V100 package, into your computer.
  • The Netcomm V100 Installation screen should automatically appear.
  • Select the "Install Utility" button and follow the onscreen prompts to install the utility.
  • Upon the completeion of installing the configuration utility, you will find the corresponding icons in Windows "All Programs" section and program short cut on your Windows Desktop
Step 2 - Configuring the Netcomm V100 ATA
  • When you open the "Netcomm V100 PC Tool" program, you will be presented with the Status window.
  • VoIP Phone Number, Registration Status, Connection Mode (PPPoE/DHCP/Fixed IP), IP Address, Subnet Mask, Default Gateway, DNS and MAC Address settings are displayed here.
  • To configure the Netcomm V100 ATA, click the SIP tab at the top of the window.

  • Enter the following Settings:
  • User Name: Your Adam username (without "@adam.com.au")
  • Proxy / Registrar : sip.adam.com.au
  • Domain Info: sip.adam.com.au
  • Auth. User Name: Your Adam username (without "@adam.com.au")
  • Auth. Password Your Adam Internet Password
  • Expire 120
  • Q value (0-1.0)0.8
  • The rest of the options can be left as default.
  • Click Apply to save settings.

  • The program will now register your details on the server and advise if successful.
  • If the program reports it was unable to register your username, check your internet connection is functioning correctly and that your username is registered for AdamTalk through the Members Area.
  • To make calls, simply pick up the telephone attached to your Netcomm V100 ATA.